A USB3.1 Receiver Test Solution integrates a USB3.1 Receiver Test Adapter G0373A with a Signal Quality Analyzer (SQA) MP1800A and dedicated high-speed serial data test software to support the latest USB3.1 Gen2 SuperSpeed+, 10 Gbit/s receiver test standards. Developed by Anritsu Co., the setup provides engineers with an all-in-one USB3.1 receiver test solution to ensure compatibility and compliance of high-speed communications device and serial BUS interface designs.
Pairing the SQA MP1800A and G0373A generates signals required by USB3.1 receiver tests as well as BER measurements. The MX183000A software controls the MP1800A/G0373A measurement system to set and manage the receiver test signals and display the BER measurement results. All tests are implemented using optimized high-quality output waveforms that ensure highly reproducible results.
The solution supports USB3.1 Gen1 (5 Gbit/sec) and Gen2 (10 Gbit/sec) receiver Jitter Tolerance tests, and sends/receives Low Frequency Periodic Signaling (LFPS) and LFPS-based PWM (LBPM) Messaging signals to ensure the performance of USB interfaces. High-quality test signals, as well as functions for communicating with interfaces allow the Anritsu USB3.1 Receiver Test Solution to conduct highly accurate signal integrity tests, as well.
A plug-in modular Bit Error Rate Tester (BERT), the SQA MP1800A supports measurement of multi-channel wideband interfaces up to 32 Gbit/sec. Automated measurements can take place when the Receiver Test Solution is integrated with compatible Granite River Labs USB3.1 receiver calibration and test automation software GRL-USB31-RXA. The result is faster, more efficient verification processes that can lower test costs and help improve time to market.
More info: www.anritsu.com
Leave a Reply
You must be logged in to post a comment.