The new generation of R&S RTP high-performance oscilloscopes combine high-class signal integrity measurements with the fastest possible acquisition for real-time analysis. The new models come with a bigger and brighter 13.3-in full HD touchscreen and a fully redesigned front panel. Users can take advantage of the crisp 16:9 screen format, which displays waveforms while allowing […]
Oscilloscopes
Back-packable MSO offers benchtop-level performance
The 2 Series Mixed Signal Oscilloscope (MSO) can go seamlessly from the bench to the field and back, enabling workflows previously unimagined on a scope. It is the first portable oscilloscope to offer benchtop performance and the award-winning Tektronix user interface. Weighing less than four pounds and 1.5 inches thin, the 2 Series MSO can […]
USB Type-C test coupon fixtures speed scope debug tasks
New USB Type-C High-speed and Sideband Test Coupon Fixtures provide the industry’s first oscilloscope solution for high-speed probing and analysis of an active data link at the USB Type-C connector. Additional connection to a Teledyne LeCroy protocol analyzer provides complete debug capability of any USB Type-C link negotiation failure. USB Type-C devices undergo negotiation when […]
Handheld two-channel 100/200-MHz scopes combine multimeter, recorder, trend plot functions
The new and improved Siglent SHS-X Handheld Two-channel Digital Oscilloscopes are available in 100 MHz and 200 MHz analog bandwidths and isolated or non-isolated versions, with 1 GSa/sec sample rate and 12 Mpts memory depth. The SHS800X versions have two non-isolated scope channels and one isolated multimeter channel, while the SHS1000X models feature full isolation: […]
The difference between signal under-sampling, aliasing, and folding
Most engineers today are sensitive to problems that arise when digital measurement instruments try to capture signals containing frequencies that are too high for the sampling circuitry to handle–undergrad EE programs typically cover Nyquist’s sampling theorem. Nevertheless, there are terms associated with sampling problems that sometimes get confused. Probably the three concepts most likely to […]
Five-in-one high-end oscilloscopes sport four channels at 3/5 GHz bandwidth
The new multifunctional high-end, four-channel DS70000 Series Oscilloscopes. The DS70304 (3 GHz) and DS70504 (5 GHz) offer a sample rate up to 20 GSa/sec, and a deep 2 GPts memory depth is available to acquire and process large amounts of data. The signal acquisition rate of up to 1 Mwfms/sec enables non-stop real-time recording and […]
Scope/analyzer delivers 4 channels of 10 GSa/sec, 1 million waveforms/sec capture rate, high-rez measurements to 16 bits
The StationMax DS70000 Series digital oscilloscopes are available in either 3 or 5 GHz bandwidths and combine the new UltraVision III oscilloscope technology and UltraReal spectrum analysis technology into RIGOL’s most powerful test and measurement instrument ever. The innovative UltraVision III platform combines updated oscilloscope and spectrum analysis technology with its custom front-end Phoenix ASIC […]
Tablet-based scopes feature bandwidths to 120 MHz, up to 14-bit resolution
The Owon TAO3000 Series 2/4 channel 8/14bit Tablet Oscilloscopes are handy portable scopes especially suited for field use. They offer 70, 100, or 120-MHz bandwidth and a 1 GSa/sec signal sampling rate, with a built-in 4 1/2 digit multimeter in the two-channel models. A huge 40 MSa record length allows for deep investigation into glitches […]
PC-based VNAs get automated E-Cal, TRL/TRM calibration
The PicoVNA 108 8.5 GHz analyzer now includes automated E-Cal calibration and TRL/TRM calibration. The PicoVNA 108 achieves calibration automation through either male SMA or female SMA E-Cal modules. These are USB-powered and controlled to electronically select the various short, open, load and through reference standards as they are needed within the calibration process. You […]
MIPI M-PHY High-Speed GEAR 5 UFS 4.0 protocol analyzer/exerciser sports solder-in probes
The Eclipse M52 Analyzer/Exerciser supports the next generation of M-PHY High Speed Gear 5 (HS-G5), UniPro 2.0/UFS 4.0 development and can be configured now with the new GEAR 5 solder-in probes. The Eclipse M52 analyzer/exerciser assists design and test engineers working with the high data rates and aggressive power management of the UniPro and UFS […]