A PCI Express 5.0 (PCIe Gen5) test solution combines Anritsu’s Signal Quality Analyzer-R MP1900A BERT series with Tektronix’s DPO70000SX series 70-GHz Real-time Oscilloscope and automation software. The all-in-one solution supports tests of PCIe 5.0 electrical characteristics, physical-layer protocol analysis, and transmitter/receiver and Link Equalization Training (LEQ) tests to facilitate efficient development of high-speed ICs, devices, […]
Communication Test
Kit verifies isolation effectiveness of RF shielded enclosures
The JRE TVK Isolation Tester can help verify the proper shielding isolation of RF enclosure test set-ups. This test combination, consisting of the STA-1, a sensitive handheld spectrum analyzer, and the HPSS-1, a high power 2.45-GHz test signal source, can easily and quickly measure enclosure isolation down to less than -100 dB. The TVK Isolation […]
Trigger-and-decode scope setup handles 1000BASE-T1 automotive Ethernet
The new K58 option for R&S RTO and R&S RTP scopes is billed as the world’s first triggering and decoding solution for 1000BASE-T1. The flexibility of Automotive Ethernet makes the simple twisted-pair network technology a candidate for an ever-increasing range of in-vehicle networks. To verify, commission and troubleshoot designs based on an Automotive Ethernet communication […]
Waveguide-to-coax adapters use European IEC standard flanges
A new line of euro-style flange, waveguide-to-coax adapters are candidates for radar, satellite and wireless communications, and test instrumentation applications. Fairview Microwave’s new waveguide-to-coax adapters cover a wide range of waveguide sizes that include European IEC standard flanges (including UBR square cover, UDR and PDR types), WR-22 to WR-430, right-angle and end-launch coaxial connector options, […]
Antennas and antenna measurements
Most antenna designs operate via the resonance principle, which is based on the fact that electrons moving through a conductor reflect back toward the power source when encountering a discontinuity. When current, caused by a radio signal’s induced voltage, reaches the end of the antenna element, it is reflected, travels in the reverse direction, and […]
Power sensors make high-speed, high-accuracy RF measurements up to 67 GHz
Rohde & Schwarz has increased the maximum measurable frequency of its three-path diode power sensors to 67 GHz. The three-path technology enables extremely fast and accurate power measurements with a high-sensitivity, portable instrument of minimum size and weight. This frequency extension makes high-speed power measurements possible for additional applications such as IEEE 802.11ay and 802.11ad […]
Wireless testbeds support new WiFi 6E standard
The Pal-6E wireless personal testbeds now support Wi-Fi 6E. A massive portion of new spectrum is made available by regulators around the world for Wi-Fi and other unlicensed uses. A total of 1,200 MHz in the new 6-GHz band increases the number of 80 MHz channels available for Wi-Fi from six to twenty resulting in […]
Compliance tests cover 2.5/5/10GBASE-T1 automotive Ethernet speeds
Rohde & Schwarz, together with connector and cable assembly manufacturer Rosenberger, have successfully demonstrated compliance testing for MultiGBASE-T1 supporting 2.5/5/10GBASE-T1 automotive Ethernet speeds, based on the OPEN Alliance TC9 working group test specification. This development enables vehicle manufacturers and component suppliers to have confidence in the performance of future, high-speed in-vehicle networks. Automotive applications such […]
Test instrument enables Wi-Fi testing, OFDMA wireless packet capture in the field
The fieldPal is a precision Wi-Fi test instrument that enables Wi-Fi testing and OFDMA wireless packet capture in the field. To test performance of the new wireless technologies and applications, engineers use controlled laboratory testbeds like the octoBox in combination with field testing. New types of test tools are needed that allow testing in the […]
System amplifier handles 2 GHz to 20 GHz range
A new system amplifier, designated R&S SAM100, sets new standards in ease of operation, robust design and super-compact footprint within the 2 – 20 GHz range with up to 20W output power. The SAM100 targets manufacturers of passive and active microwave components and microwave devices for mobile radio (UMTS, LTE, 4G and 5G), IoT (WLAN, […]