• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Test & Measurement Tips

Oscilloscopes, electronics engineering industry news, how-to EE articles and electronics resources

  • Oscilloscopes
    • Analog Oscilloscope
    • Digital Oscilloscope
    • Handheld Oscilloscope
    • Mixed-signal Oscilloscope
    • PC-based Oscilloscopes – PCO
  • Design
  • Calibration
  • Meters & Testers
  • Test Equipment
  • Suppliers
  • Video
  • EE Learning Center
  • FAQs
You are here: Home / Calibration / Electrical tester calibrator helps comply with new regulatory standards

Electrical tester calibrator helps comply with new regulatory standards

February 15, 2019 By Lee Teschler Leave a Comment

The 5322A Electrical Tester Calibrator is a multi-device calibrator built to facilitate compliance with exacting international standards such as the UK’s BS7671 17th Edition, IEC/EN Standards, Australia and New Zealand’s AS/NZS 3000 and Chinese verification/calibration regulations for various electrical testers.

The 5322A combines many functions into a single instrument, replacing discrete resistors, decade boxes, and other custom solutions commonly used to calibrate electrical testers. This single-box solution speeds and simplifies calibration because users only need to learn, operate, and maintain one calibrator rather than multiple instruments. While it is difficult to automate multiple instruments, the 5322A can be automated with Fluke Calibration MET/CAL Calibration Management Software in 5320A emulation mode—further increasing speed and throughput.

5322A-electrical-tester-calibrator

The 5322A is capable of handling a wide spectrum of electrical safety tester workloads. From older hand-cranked insulation testers to modern insulation resistance testers, hipot testers, RCD testers, earth group resistances testers, loop/line impedance testers, ground bond testers, portable appliance testers (PATs), and multi-function installation electrical safety analyzers, the 5322A Electrical Safety Tester Calibrator has it covered.

The 5322A Electrical Tester Calibrator is available in multiple model configurations offering the flexibility to select the features best suited to the user’s workload. The base 5322A model offers 1.5 kV high resistance sourcing. The 5322A/5 offers 5-kV high-voltage resistor sourcing. Add to either model active loop compensation and a 600-V precision ac/dc output source for calibrating devices under test with metering capabilities, or a characterized 40-kV probe accessory for precision measurement of very high voltages to 0.5% accuracy.

The context sensitive user interface and help files are available in English, German, Chinese French, Spanish, and Russian languages. A large, full-color display enables the user to easily read the primary sourced or measured values. The design features an active terminal display, outward jog wheel, numeric keyboard, on-screen graphical help guide, and spec readout.

To learn more about the 5322A Electrical Tester Calibrator: http://www.flukecal.com/5322A
For a complete list of regulations met by the 5322A: https://us.flukecal.com/5322a-compliance

You may also like:

  • Teledyne LeCroy PCI Express 5.0 Physical-Layer Testing
    T&M gear supports PCI Express 5.0 physical-layer testing
  • leap-award
    T&M LEAP Award winners announced at gala dinner

  • Safety guidelines for hipot testing and setting up a safe…
  • active differential probe
    Basics of active and differential scope probes

  • Making noise figure measurements with handheld analyzers

Filed Under: Calibration Tagged With: flukecorporation

Reader Interactions

Leave a Reply Cancel reply

You must be logged in to post a comment.

Primary Sidebar

Test & Measurement Handbook


Oscilloscopes Finder

Search Millions of Parts from Thousands of Suppliers.

Search Now!
design fast globle

Subscribe to our Newsletter

Subscribe to test and measurement industry news, new oscilloscope product innovations and more.

Subscribe Today

EE TRAINING CENTER CLASSROOMS

EE Classrooms

RSS Current EDABoard.com discussions

  • kt/c noise of sample and hold
  • PS4 chip replacement not going to plan
  • What is the function of the long stub?
  • How to use of GaN Transistor gates instead of IGBT in this circuit ?
  • Help with Verilog replicate operator

RSS Current Electro-Tech-Online.com Discussions

  • Audio equalizer
  • Background of Members Here
  • Adding Current Limit Feature to a Buck Converter
  • Passthrough charging-simple but impossible to achieve?
  • Opamp ciruit

Footer

EE World Online Network

  • DesignFast
  • EE World Online
  • EDABoard
  • Electro-Tech Online
  • Analog IC Tips
  • Microcontroller Tips
  • Power Electronic Tips
  • Sensor Tips
  • Connector Tips
  • Wire and Cable Tips
  • 5G Technology World

Test & Measurement Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us
Follow us on TwitterAdd us on FacebookFollow us on YouTube Follow us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy