SDS6062 is a two-channel benchtop scope with a 10MSa record length for each channel, allowing zooming capability for investigating fast, intermittent pulses. This low-cost scope samples at 500MSa/s and includes deep memory, external, video-capable trigger, auto-measurements, auto-scaling, large 8″ full color LCD display, XY mode, auto-set, averaging, math functions, USB output, waveform storage, pass/fail output and a 3-year warranty. Even FFT functionality is included for frequency spectrum display. The SDS6062 comes in a slim case and can be fitted with an optional battery for field or isolated operation.
- Autoscale can automatically adjust the vertical gain, or the horizontal time base, or both together. This is useful for circuit probing — as the probe is moved from point to point on a circuit board, the display auto-adjusts for best trace presentation. It functions in the same manner as ‘AutoSet’, but instead of being a one-time function, it’s active until turned off, keeping “hands-free.”
- FFT allows instant display the frequency spectrum of the signal under test.
The SDS6062 can automatically measure and display frequency and peak-peak/rms/mean values, but cursors can also be moved to make individual readings. A built-in self-calibration facility improves measurement accuracy. Video monitoring is also possible since you can trigger on NTSC/PAL/SECAM line or field waveforms. SDS6062 features include: manual cursor measurements, up to 19 automatic measurements (including frequency), high-speed screen update, storage for up to 15 waveforms and set-up parameters, convenient USB serial interface with PC software, 400V (DC+AV peak) maximum input, optional rechargeable battery pack and multi-language capabilities.
This lightweight scope is perfect for any engineer’s or student’s desk. The USB master and slave connections make printing or storing results easy too. With a large 7.8” 640 x 480 color TFT-LCD, this scope is small enough and light enough to carry anywhere, weighing under 4 lbs. Sensitivity range is 2mV/div to 10V/div with maximum display of ±50V. Another really useful feature is the ability to store up to 15 waveforms for comparison with live inputs. A persistence control is available too which simulates old analog scopes to compare slow-moving waveforms with previous scans. ‘A+B’ and ‘A-B’ math capability is included, while the X-Y display feature can be used to reveal phase delays.
Saelig Company, Inc.
www.saelig.com
Leave a Reply
You must be logged in to post a comment.