The new Envision X84 protocol analyzer is designed to ease troubleshooting and support the development of complex imaging and detection systems for mobile displays and cameras.

Envision X84 is the industry’s first analyzer that supports both MIPI C-PHY/D-PHY and MIPI Camera Serial Interface (CSI-2)/MIPI Display Serial Interface (DSI-2) in a single platform, providing device designers and system integrators more design flexibility, control and expediency than previously available. MIPI interfaces and busses are used extensively in both cameras and mobile displays in devices and systems.

MIPI CSI-2 supports high-performance video (1080p, 4K, 8K and beyond), and high-resolution photography and is increasingly used to transport camera images for advanced driver assist systems (ADAS) in the automotive environment. MIPI DSI-2 supports ultra-high definition (4K and 8k) mobile displays and specifies the physical link between the chip and display in devices such as smartphones, tablets, AR/VR headsets and connected cars.

Design and test engineers and system integrators can rely on the Envision X84 analyzer to test performance and conformance of MIPI CSI-2 for cameras and image sensors and MIPI DSI-2 for mobile displays. The Envision X84 protocol analyzer will help to accelerate the design and development of mobile devices, application processors, and systems on chip (SoCs), especially when both C-PHY and D-PHY are implemented in the same chip.

The Envision X84 protocol analyzer with full C-PHY and D-PHY capture capability has up to three lanes of C-PHY at 3Gsym (24 Gbps) and up to four lanes of D-PHY at 2.5 Gbps or 10 Gbps. This includes support for MIPI CSI-2 and MIPI DSI-2 protocols. As the most flexible and robust analyzer on the market for mobile camera and display environments, Envision X84 performs protocol checking from PHY level through protocol-level events, including low-power modes and reads/writes. Complex, event-based transaction captures are coupled with 2.5-nsec event timing resolution for detailed debugging. The system supports all camera and display packet types and data formats as well as command and video modes.

Teledyne LeCroy’s Envision X84 MIPI C-PHY/D-PHY analyzer is currently available for purchase. For more information, engineers can contact their regional Sales Engineer: 1-800 909-7211 or 408 273-5736; or protocolsales@teledynelecroy.com; or visit the Envision x84 web page at: teledynelecroy.com/protocolanalyzer/mipi/envision-x84-analyzer