New M2p.65 xx series PCIe cards generate waveforms with amplitude swings of up to ±12 V into 1 MΩ or ±6 V into 50 Ω. To achieve the higher output voltage ranges, the cards have been fitted with additional amplification and larger cooling plates. This makes the cards a little wider, so they occupy two PCIe slots but remain 168-mm long. The small size allows them to fit into almost any PC, turning it into a powerful and flexible waveform generator.
The M2p.65xx series AWGs use the latest 16-bit digital-to-analog Converters and feature a fast PCIe x4 interface with up to 700 MByte/sec streaming speed. Users can select output speed rates of either 40 MS/sec (M2p.654x series) or 125 MS/sec (M2p.657x series) and models with one, two or four channels per card.
Each channel features its own DAC and output stage. Multi-channel cards share a common clock and trigger to ensure full synchronization and the output stages incorporate four switchable filter paths to help optimize signal quality. The flexible output stages combine with the high-resolution 16-bit DACs to enable the generation of signals with very low distortion, exceptional dynamic range and a high signal-to-noise ratio.
Each card comes equipped with a generous 512 MSamples of on-board memory. The large memory is complemented by a variety of different output modes. For example, the memory can be segmented and waveforms can be created by looping on and switching between different segments. The cards also feature a FIFO streaming capability that enables new waveform data to be read over the fast PCIe bus (at rates of up to 700 MB/sec) while replaying already transferred information. This flexibility allows users to create ultra-long, single-shot waveforms or constantly changing, burst-type signals such as those found in communications, radar, ultrasound, LIDAR or sonar systems.
For applications that require the connection of AWGs and Digitizers, such as stimulus-response or closed-loop applications, Spectrum’s Star-Hub piggy-back module synchronizes up to 16 different M2p class products. The new M2p.65xx AWGs match perfectly with the M2p.59xx 16-bit digitizers released in 2018. The M2p.59xx digitizers offer one to eight channels with sampling rates between 5 MS/sec and 125 MS/sec. The Star-Hub distributes a common clock and trigger signal to each channel ensuring fully synchronous operation. Star-Hub systems are also perfect for situations where multiple test points or arrays of sensors need to be stimulated by different test signals at the same time.
Controlling and generating signals with the Spectrum AWGs is also easy and straight forward. The cards are fully programmable and drivers are provided, free of charge, to support the most popular languages (such as C++, VB.NET, C#, J#, Delphi, Java or Python code) as well as third-party software tools like LabVIEW and Matlab. Alternatively, users can simply run Spectrum’s own software, SBench 6 Professional.
SBench 6 enables the user to control all the modes and settings of the AWG via a simple, easy-to-use, interface. The software is designed to support multi-channel operation and has a host of built-in features for waveform display, signal generation, data analysis and documentation. Basic signals can be created using the software’s EasyGenerator function that produces waveforms like sine waves, triangles or rectangles with programmable frequency, amplitude and phase. More complex signals can be created using mathematical equations or imported from other programs or devices (such as digitizers or oscilloscopes) using Binary, ASCII, or Wave formats.
Once installed in a PC, signal outputs, as well as clock and trigger inputs, are provided via front-panel SMB connectors. The front-panel also hosts four MMCX connectors (one multi-function output, and three multi-function I/O lines), which can be used for different tasks such as digital output channels, clock, trigger or status output as well as asynchronous I/O lines. This high level of connectivity allows the AWG cards to be easily adapted into most automated test system environments.
Switching the multi-purpose I/O lines to digital output adds another four synchronous output channels to the AWG. A single AWG card can then generate four analog outputs and four digital outputs in parallel with full speed. This is especially helpful when interfacing with external equipment in experiment control or for OEM projects.
The Spectrum M2p.65xx series AWGs start at $3,630. All cards include a base version of Spectrum’s SBench 6 software for first tests.
Spectrum Instrumentation Corp., 401 Hackensack Ave, 4th Floor, Hackensack, NJ 07601, (201) 562-1999, www.spectrum-instrumentation.com
Leave a Reply
You must be logged in to post a comment.