A PCI Express 5.0 (PCIe Gen5) test solution combines Anritsu’s Signal Quality Analyzer-R MP1900A BERT series with Tektronix’s DPO70000SX series 70-GHz Real-time Oscilloscope and automation software. The all-in-one solution supports tests of PCIe 5.0 electrical characteristics, physical-layer protocol analysis, and transmitter/receiver and Link Equalization Training (LEQ) tests to facilitate efficient development of high-speed ICs, devices, […]
anritsucompany
Signal quality analyzer gets expanded PCIe receiver test capabilities
The MP1900A BERT Signal Quality Analyzer-R now has expanded PCI Express (PCIe) receiver test capabilities to support emerging PCIe 6.0 designs using PAM4 32-Gbaud technology. With the upgraded high-quality waveform performance of the PAM4 pulse pattern generator (PPG) MU196020A, the MP1900A can conduct PCIe receiver tests on high-end servers, high-performance computers, 400 GbE communications equipment, […]
Economical modular two-port VNAs work at up to 43.5 GHz
The ShockLine ME7868A family of modular two-port vector network analyzers (VNAs) can conduct full vector S-parameter measurements over wide distances of up to 100 m. Consisting of two MS46131A one-port VNAs with the PhaseLync synchronization option hardware and accessories, the ME7868A VNA uses the MS46131As as portable VNA ports to directly connect to the device […]
High-frequency components line aids in testing mmWave and optical designs
The W1 (1.0 mm) component line has expanded with the introduction of bias tees, dc block, and semi-rigid cables that operate to 110 GHz and provide broadband frequency scalability in high-frequency device characterization and optical networking applications. The addition of the new W1 components provides Anritsu with the broadest millimeter wave (mmWave) coaxial component portfolio […]
Signal quality analyzer supports USB4 receiver tests
The USB4 receiver test solution uses the Anritsu Signal Quality Analyzer-R MP1900A in combination with automation software from Granite River Labs or Teledyne LeCroy to control a connected oscilloscope and implement tests meeting the latest USB4 standards. The spread of next-generation 5G mobile communications and Internet of Things (IoT) devices is driving development of various […]
Test setup checks out latest IEEE 802.11 WLAN standard
The new Anritsu Wireless Connectivity Test Set MT8862A has been successfully integrated in combination with the EMITE E600 Reverberation Chamber to test OTA TRP/TIS performance of IEEE 802.11ax devices in a repeatable environment. With built-in communications protocols and optimized performance for WLAN testing, the MT8862A + EMITE reverberation chamber can characterize with high reliability the […]
Instrument runs true PIM analysis over fiber for IQ data
The IQ Fiber Master MT2780A multi-port CPRI-based RF and PIM (passive intermodulation) analyzer that is the first instrument to perform true PIM analysis over fiber and present RF spectrum results derived from IQ data. The MT2780A reduces test costs and time by providing field engineers, field technicians, and third-party contractors with a single instrument to […]
Real-time hand-held spectrum analyzer captures IQ data
IQ capture and IQ streaming options for the Field Master Pro MS2090A make the real-time spectrum analyzer (RTSA) the first handheld analyzer to capture 110 MHz of IQ data. The MS2090A can conduct comprehensive spectrum analysis in a variety of general-purpose applications, including military intelligence and government regulations. With 110 MHz bandwidth and 200 MSps […]
Software runs PCI Express 5.0 receiver tests
The PCIe Gen5 (PCIe 5.0) Link Training and Tx/Rx LEQ Test Automation software runs on the Signal Quality Analyzer-R MP1900A series BERT to create the industry’s first measurement solution supporting the PCIe 3.0, 4.0 and 5.0 standards. With the new options, high-speed server, computer, and communications equipment engineers have a single solution to conduct PCIe […]
Test setup checks out USB4 designs
The QualiPHY USB4 Electrical Transmitter (Tx) and Receiver (Rx) Compliance Test Software (QPHY-USB4-TX-RX) runs on the LabMaster 10 Zi-A and WaveMaster/SDA 8 Zi-B oscilloscopes from Teledyne LeCroy, which are used in conjunction with Anritsu’s Signal Quality Analyzer-R (SQA-R) MP1900A BERT. The USB Type-C connector is quickly becoming the PC industry’s standard for converged high-speed data, […]
