LTE download data speeds of 2Gbps have been hit using Keysight’s 5G Protocol R&D Toolset and Qualcomm Technologies’ mobile test device, powered by the Qualcomm Snapdragon X24 LTE modem. Keysight’s 5G Protocol R&D Toolset, the industry’s first 5G protocol test solution, is part of Keysight’s suite of Network Emulation Solutions, the only seamless radio frequency […]
keysighttechnologies
28-GHz channel-sounding test gear aids 5G research project
A 28 GHz Channel Sounding Solution from Keysight Technologies Inc. is going to NTT DOCOMO, Inc., Japan’s Leading Mobile Operator, for a channel sounding research project. The project aims to develop next-generation 5G wireless communication systems by conducting channel sounding studies at millimeter-wave frequencies. 5G channel sounding is required to characterize the air interface for […]
Device current waveform analyzer characterizes and validates up to 100-A power delivery network devices
The Keysight CX3300 is a solution that enables the characterization and validation of PDN for IoT/mobile devices quicker and more accurately. The ultra-low-noise, wide bandwidth and wide dynamic range performance of these new sensors (CX1104A and CX1105A), used with the CX3300 series now allows measurements at a wider range of dynamic current, from 1 μA […]
Automotive radar test gear verifies automotive radar systems technology
The Keysight E8740A Automotive Radar Signal Analysis and Generation Solution enables radar-based, advanced driver assistance systems to proactively detect and mitigate risks of collisions. The Keysight E8740A automotive radar signal analysis and generation solution leverages Keysight’s leadership in mmWave technology providing signal analysis from 3 Hz to 110 GHz in a continuous sweep. It performs […]
PXIe radio test set covers emerging land mobile radio, aerospace/defense military communications
The new Keysight M8920A PXIe Radio Test Set provides audio and RF frequency coverage from 100 kHz to 6 GHz and modulation bandwidth up to 160 MHz for generation and analysis of simple to complex waveforms used in emerging Land Mobile Radio (LMR) and aerospace and defense military communications (MilCom) applications. Keysight has partnered with […]
Keysight Technologies, Samsung complete 5G interoperability tests
Keysight Technologies, Inc. says it has run successful inter-operability tests of its User Equipment (UE) Emulation Solution and Samsung’s new 5G base station based on 5G New Radio (NR) standards. Keysight and Samsung have agreed to align their plans to enable 5G base station testing and build an ecosystem of interoperable products. Combining Samsung’s product […]
mm-Wave testbed helps validate first commercial 5G NR active array antennas at 26 GHz
Ball Aerospace and Anokiwave have validated the first commercial 5G NR active array antenna product designs in the 26 GHz band using the Keysight 5G NR-ready measurement testbed. The use of phased arrays at mmWave frequencies requires over-the-air (OTA) testing as well as spatial beam measurements. Keysight metrology-grade test equipment offers the sensitivity necessary to […]
Keysight Technologies Receives Certification for eCall Test Emulator Software
The Keysight E6951A public safety answering point (PSAP) emulator has been certified by NavCert GmbH. The E6951A is part of Keysight’s E6950A eCall Conformance Test Solution. The certification was awarded Dec.18, 2017. EU-Regulation 2015/758 states that beginning April 1, 2018, eCall in-vehicle system (IVS) functionality must exist in all new types of vehicles in categories […]
Instrumentation turns low-frequency noise measurements into math models
The new Advanced Low-Frequency Noise Analyzer (A-LFNA) and WaferPro Express software let designers measure noise more accurately. WaferPro Express software comes out of a collaboration among Keysight Technologies and research centers, such as Sweden’s Chalmers University, Germany’s Fraunhofer EMFT, Belgium’s IMEC, and France’s LAAS-CNRS. The Keysight A-LFNA now provides designers the flexibility to transform their […]
Design, test software platform integrates simulation, design, test workflows
PathWave from Keysight is the first software platform to integrate design, test, measurement and analysis. The software platform provides engineers and technicians with flexible and immediate access to the design and test tools. The interoperability of the design and test tools and advanced data management significantly speeds the product development cycle, eliminating the need to […]
