Teledyne Test Tools T3RC Rogowski Current Probes offer broad current measurement ranges and a wide frequency span. Five models are available, providing measurement capabilities up to 6,000 A and with the capability to connect around the leg of a small T0-220 device. The probes connect to any standard oscilloscope via a conventional BNC connection. The […]
teledynelecroy
What’s new in USB Power Delivery 3.0
A new version of the USB spec puts additional demands on testing regimes that wring out power-handling options. David Maliniak | Teledyne LeCroy Since its official debut in 1996, the Universal Serial Bus (USB) protocol has seen numerous revisions spanning three generations of the standard, with USB 4.0 waiting in the wings for later in […]
Fast interconnect analyzer reveals time- and frequency-domain details in a single acquisition
The WavePulser 40iX high-speed interconnect analyzer allows high-speed hardware designers and test engineers to characterize and analyze interconnects and cables for high-speed serial protocols such as PCI Express, HDMI, USB, SAS, SATA, Fibre Channel, InfiniBand, Gigabit Ethernet, and Automotive Ethernet. Until now, interconnect testing and validation has been bifurcated between time- and frequency-domain testing. For […]
PCIe 4.0 U.2/U.3, M.2 interposers facilitate SSD protocol analysis
The U.2/U.3 and M.2 interposer cards help analyze both standard single-port and dual-port solid-state drives (SSDs) that support the PCI Express (PCIe) 4.0 specification. When used with the Summit Protocol Analyzer, the U.2/U.3 and M.2 Interposer Cards enable the capture and analysis of all PCIe bus traffic between a host backplane and a single- or […]
Protocol analyzer platform wrings out next-generation USB4
Teledyne LeCroy has developed the first protocol analyzer platform for testing next-generation USB4 and Thunderbolt 3 systems. The convergence of the underlying Thunderbolt and USB protocols in the USB4 specification will increase compatibility among USB Type-C connector-based products, simplifying how people connect their devices. Teledyne LeCroy’s new Voyager M4x Protocol Analyzer will enable companies to […]
Software runs USB 3.2 transmitter and receiver compliance tests
A new automated compliance test package handles USB 3.2 transmitter and receiver compliance testing to the QPHY-USB3.2-Tx-RX spec. USB 3.2 is the latest iteration of the USB spec, allowing multi-lane operation: either two lanes at 5 or 10 Gb/sec, enabling a maximum transfer rate of 20 Gb/sec (Gen2x2). To that end, Teledyne LeCroy developed the […]
High-def scopes handle three-phase power analysis
A three-phase power analysis software package brings single-phase and three-phase static and dynamic power analysis to the HDO8000A, HDO6000A and WavePro HD 12-bit High Definition oscilloscopes from Teledyne LeCroy. With the 3-Phase Power Analysis software package, research and development engineers can now use Teledyne LeCroy’s 12-bit-resolution oscilloscopes to better understand complex power conversion system and […]
T&M gear supports PCI Express 5.0 physical-layer testing
The new Teledyne LeCroy QPHY-PCIE5-TX-RX physical-layer software option for LabMaster 10Zi-A series oscilloscopes provides: Automated receiver-test calibration for jitter-tolerance testing at the full 32 GT/sec PCIe 5.0 rate. While existing solutions can take up to a full day to calibrate before even starting the test, the Teledyne LeCroy calibration will be completed in a fraction […]
Dual-channel, multi-function AWGs deliver high-def vertical voltage resolution
Dual-channel AWGs branded T3AWG3252 (250 MHz) and T3AWG3352 (350 MHz) offer 16 bits of vertical voltage resolution, an output voltage window of up to ±24 V, and waveform memory of up to 1 GS/channel. In addition to being AWGs, these highly versatile Teledyne Test Tools (T3) are able to function as arbitrary function generators or […]
MIPI C-PHY/D-PHY analyzer supports mobile display, camera, ADAS development
The new Envision X84 protocol analyzer is designed to ease troubleshooting and support the development of complex imaging and detection systems for mobile displays and cameras. Envision X84 is the industry’s first analyzer that supports both MIPI C-PHY/D-PHY and MIPI Camera Serial Interface (CSI-2)/MIPI Display Serial Interface (DSI-2) in a single platform, providing device designers […]