The Eclipse M52 is an M-PHY Gear 5 UFS 4.0 ready protocol analyzer and exerciser that supports JEDEC UFS 3.1, MIPI UniPro v1.8 and M-PHY v4.1 HS-G4 and now and can be upgraded to support JEDEC UFS 4.0, MIPI UniPro v2.0 and M-PHY v5.0 HS-G5 when available.
Consumers of smartphones, digital cameras, and other consumer electronics using universal flash storage (UFS) are always looking for higher data transfer rates, lower power consumption and improved reliability. These requirements are met with the high-speed MIPI M-PHY v5.0 Gear 5 (HS-G5) and JEDEC UFS 4.0 specification. Design and validation engineers implementing and integrating the latest UFS 4.0 specification into consumer product storage solutions can rely on the Eclipse M52 Protocol Analyzer/Exerciser to assist them in design validation, compliance or conformance testing and system debug.
The Eclipse M52 offers unique capabilities such as:
Trace Validation – a patented artificial intelligence (AI) tool that uses complex state machine logic to analyze traces algorithmically without user inference or involvement. Trace Validation provides a complex analysis of link traffic such as UFS packet latency or UniPro Link Startup Sequences.
SmartTune equalization and Eye Monitor help optimize signal acquisition at the analyzer to ensure error-free M-PHY symbol capture.
Compliance and Conformance Verification with pre-written Conformance Test Suites
Link Traffic Generation with Error Injection for host emulation
Stress Testing – Using Run Control or the API, users can Execute any loop order by Speed, Link widths, LUNs or individual test cases; Each category can be run ascending, descending, or random seed order; Stop after a specified number of test case configuration loops or No Result Test Cases have occurred.
Events View – UniPro and UFS Events views complement the Packet List windows, showing all events on the bus in both directions in one single snapshot linked to the selected packet and bookmarks.
The Eclipse M52 UFS protocol analyzer/exerciser supporting UFS 3.1, UniPro v1.8 and M-PHY v4.1 is available now. Support for UFS 4.0, UniPro v2.0 and M-PHY v5.0 HS-G5 is expected to be available in the last quarter of 2021.
Teledyne LeCroy, 700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, 800-553-2769 or 845-425-2000, Fax Sales: 845-578-5985, Email Sales: contact.corp@teledynelecroy.com, teledynelecroy.com
Leave a Reply
You must be logged in to post a comment.