Keysight Technologies, introduced the U7243B USB 3.1 Type-C transmitter performance validation and compliance test software, the most comprehensive transmitter test support for the USB 3.1 Type-C specification. The test software allows authorized test centers to test USB 3.1 Gen2 SuperSpeed Plus 10 Gbps devices with Type-C implementations and gives in-house test and performance validation engineers […]
keysight
6.5-digit low-noise power source gets ultra-low-noise filter
Keysight Technologies introduced a new high current ultra low noise filter for the B2961A and B2962A 6.5 Digit Low Noise Power Source that can supply up to 500 mA while maintaining 10 µVrms and 1 nVrms/√Hz (at 10 kHz) noise performance. With a starting price of less than $10,000 USD, these products help researchers, electronic […]
First CXPI triggering, decode options for oscilloscopes
Keysight Technologies, Inc. has announced the clock extension peripheral interface (CXPI) decoding and triggering options for its InfiniiVision 3000T and 4000 X-Series oscilloscopes. These are the only oscilloscopes available today that can decode and trigger on the CXPI bus. These new capabilities improve engineers’ efficiency in debugging the physical layer of CXPI serial buses, which […]
E-band Signal Analysis Reference Solution uses 10-bit ADC scopes
Keysight Technologies, Inc. has announced an E-band Signal Analysis Reference Solution to provide low-cost millimeter wave analysis capability for applications in the 60-90 GHz range. The reference solution is based around the 10-bit ADC Infiniium S-Series oscilloscope to provide 2.5 GHz of high-fidelity, millimeter wave frequency analysis bandwidth. The E-Band Signal Analysis Reference Solution provides […]
Wireless test set works with reverb chamber test system
Keysight Technologies, Inc. and Bluetest AB have announced that the Keysight UXM Wireless Test Set has now been integrated into Bluetest’s leading reverberation chamber OTA test solutions, enabling mutual customers to make measurements quickly and with confidence. Bluetest’s Reverberation Test System RTS65 and measurement software Flow makes it quite easy to add additional streams to […]
Scope analysis software adds BER for PAM-4 signals
Keysight Technologies, Inc. has introduced two software updates for its real-time oscilloscope products. The software updates are currently available in the Infiniium oscilloscope firmware version 5.60. The N8827A PAM-4 analysis software update adds bit error ratio (BER) capabilities for 4-level pulse amplitude modulation (PAM-4) based signals. TheN8834A MultiScope software update adds support for Keysight’s InfiniiVision oscilloscopes. […]
High-speed, 16-channel, PXIe digital stimulus/response module
Keysight Technologies, Inc. has announced an improved, high-speed, 16-channel, PXIe digital stimulus/response (DSR) module with pattern editing development software. The improved DSR synchronizes up to 12 modules or 192 channels, a powerful and unique capability for applications in design validation and production test. The pattern editing development software enables test engineers to quickly create and edit waveform […]
Low-Frequency Network Analyzer Options for Passive Component Characterization
Keysight Technologies, Inc. has introduced a series of low-cost, low-frequency options for the E5061B LF-RF network analyzer. Keysight’s new low-frequency options expand the E5061B LF-RF network analyzer’s ability to characterize passive components, including wireless power transfer and wireless charging systems, to a broad range of applications operating over a wider frequency range, from 5 Hz to […]
BER contour analysis tool helps perform DDR4, LPDDR4 Jedec compliance measurements
Keysight Technologies, Inc. has introduced a new bit error rate (BER) contour analysis tool that helps memory designers perform DDR4 and LPDDR4 JEDEC compliance measurements. Designers are now able to make data valid window measurement with components of noise and jitter to ensure valid and accurate data transfer. The BER contour analysis tool is a capability […]
Swept source optical coherence tomography options support 1 GS/sec on 12-bit PCIe data acq. cards
Keysight Technologies, Inc. has introduced swept source optical coherence tomography (SS-OCT) application options running at 1 GS/s (-SS2) and 500 MS/s (-SS1). The new options, now available on the U5303A high-speed data acquisition PCIe card, enable OEMs to obtain faster image acquisition by increasing sampling rate and A-scan rate. This allows for non-invasive, high-speed medical […]
