The Keithley DMM7512 dual channel 7½-digit sampling multimeter packs two independent and identical digital multimeters into a low profile 1U high, full rack width space-saving enclosure. The DMM7512 targets a range of demanding high-volume manufacturing test applications that require measurement capacity, performance and a compact footprint.

Currently, all other 7 ½-digit, high accuracy DMMs provide only a single-channel in a 2U high, half-rack width chassis.

Eliminating the need for a separate instrument to capture waveform parameters, the DMM7512 enables test engineers to capture transient signals and waveforms, even low-level waveforms such as battery drain currents, with its 1 Msample/sec, 18-bit digitizer that has voltage sensitivity of 1 µV and current sensitivity of 0.1 nA. With capacity to store 27.5 million time-stamped readings, each DMM can capture a waveform’s full profile and trigger on a variety of parameters.

For dc measurements on low power components, the DMM7512 provides 10 nV, 0.1 µΩ, and 1 pA sensitivities. It supports high accuracy, low resistance measurements with offset compensated Ohms, four-wire measurement, and dry circuit measurement. It also maximizes the test-uncertainty ratio for higher quality control with one-year dc voltage accuracies as narrow as 14 ppm.

For production environments, the DMM7512 reduces test time by executing test scripts using its Embedded Test Script Processor (TSP). This saves PC command communication time since the PC does not need to send a command for every instrument action. In addition, one DMM in the DMM7512 can be set up as the master controller both to execute test routines and to control other instruments through Keithley’s TSP-Link instrument-to-instrument interface.

The Keithley DMM7512 Dual Channel 7 ½-Digit Sampling Multimeter is available now worldwide. Pricing starts at $7,000 US MSRP. For full product details go to: www.tek.com/dmm7512