• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Test & Measurement Tips

Oscilloscopes, electronics engineering industry news, how-to EE articles and electronics resources

  • Oscilloscopes
    • Analog Oscilloscope
    • Digital Oscilloscope
    • Handheld Oscilloscope
    • Mixed-signal Oscilloscope
    • PC-based Oscilloscopes – PCO
  • Design
  • Calibration
  • Meters & Testers
  • Test Equipment
  • Suppliers
  • Video
  • EE Learning Center
    • Design Guides
      • WiFi & the IOT Design Guide
      • Microcontrollers Design Guide
      • State of the Art Inductors Design Guide
  • FAQs

Coordinate Measuring Machine

Infrared camera features long-travel focus wheel for super-accurate temperature readings

November 20, 2015 By WTWH Editor Leave a Comment

FlukeTH

Fluke Corp. introduces the Fluke® TiS75 Infrared Camerawith professional-grade 320 x 240 pixel resolution and precise manual focusing that enable maintenance professionals to pinpoint issues with equipment and electrical systems. Focus is one of the most important factors in conducting infrared inspections because an out-of-focus image can produce a temperature measurement that is incorrect by […]

Filed Under: Coordinate Measuring Machine, Sensing, Test Equipment Tagged With: Fluke

Keyence to release next-generation coordinate measuring machine

August 26, 2015 By Test and Measurement Editor 1 Comment

KEYENCE will release the XM Series handheld probe coordinate measuring machine on September 1st, 2015. Conventional coordinate measuring machines require difficult installation, a controlled environment, and dedicated programmers. The XM Series is easily installed in any environment and allows any operator to perform intuitive 3D measurements with high accuracy. To overcome various challenges with conventional […]

Filed Under: Coordinate Measuring Machine, New Articles Tagged With: KEYENCE

Tools correlate physical layer, protocol layer data on a single display

December 5, 2014 By WTWH Editor Leave a Comment

Teledyne-LeCroyTH

We’re now happy to announce additional Measurement and Graphing Features for our CAN FD Solution are available.   Teledyne LeCroy announces the addition of unique measurement and graphing capabilities to their industry leading CAN Flexible Data-Rate (FD) serial trigger and decode solution. Teledyne LeCroy is the only provider of CAN FD measurement and graphing capabilities, […]

Filed Under: Coordinate Measuring Machine, data acquisition, New Articles, Test Equipment Tagged With: teledynelecroy

Power measurements span 96-dB dynamic range

October 8, 2014 By WTWH Editor Leave a Comment

KeysightTH

Keysight Technologies, Inc. announced the U2040 X-Series wide dynamic range power sensors, consisting of four USB models for wireless and radar applications, and a dedicated LAN model for satellite testing. With the world’s widest dynamic range found in a power sensor and extremely high measurement speed, the U2040 X-Series makes fast, accurate and repeatable power […]

Filed Under: Coordinate Measuring Machine, Meters & Testers, Sensing Tagged With: keysight

Tektronix Waveform Monitors Meet 4K Needs of Production, Post-Production and Broadcast Markets

July 29, 2014 By WTWH Editor Leave a Comment

Tektronix, an innovator of video quality monitoring solutions, announced that its WFM8200 and WFM8300 waveform monitors and WVR8200 and WVR8300 rasterizers can now be easily upgraded via software to support 4K, eliminating the need for customers to purchase costly hardware replacements in order to shoot, prepare and deliver 4K programming. “4K is taking off and […]

Filed Under: Coordinate Measuring Machine, Test Equipment Tagged With: Tektronix

PEG Coordinate Measuring Machine Improves Accuracy

July 23, 2014 By WTWH Editor Leave a Comment

PEGth

Precision Electronic Glass (PEG) recently installed a coordinate measuring machine to perform nondestructive measurements of complex shapes. Accurate measurements are critical to meeting stringent specifications and assuring consistency in glass parts used in x-ray, CT-scans, fiber optics, chromatography instruments, CO2 laser and other scientific, analytical or industrial instruments. The new CMM removes the human error […]

Filed Under: Coordinate Measuring Machine Tagged With: peg

Crysta-Apex S500/700/900 Sales and Support

April 7, 2014 By WTWH Editor Leave a Comment

Mitutoyo

Mitutoyo America Corporation is pleased to announce sales and support of the Renishaw PH20 probe system with the Crysta-Apex S500/700/900 series Coordinate Measuring Machines by Mitutoyo. The Crysta-Apex CMM line offers durability and high accuracy at an affordable price. It supports a wide range of inspections solutions including laser scanning, optical, and surface roughness inspection. […]

Filed Under: Coordinate Measuring Machine, Sensing, Test Equipment Tagged With: Mitutoyo

Navy FRCSW and Verisurf Collaborate On Portable Metrology Technology

July 25, 2013 By Test and Measurement Editor Leave a Comment

Verisurf Software announced a Cooperative Research and Development Agreement with the US Navy Fleet Readiness Center Southwest (FRCSW).  The intent of the agreement is to jointly develop technologies and processes to increase efficiency of Maintenance Repair and Overall of fleet aviation assets.  Under the agreement Verisurf will support in the transfer of developed technology back […]

Filed Under: Coordinate Measuring Machine Tagged With: Verisurf

Renishaw introduces surface finish measurement for CMMs

July 25, 2013 By Test and Measurement Editor Leave a Comment

surface finish measurement for CMMs with new probe for REVO five-axis system

Renishaw’s SFP1 probe option for the REVO five-axis measurement system allows surface finish inspection to be fully integrated within coordinate measurement routines. With a measurement capability of 6.3 to 0.05 Ra, the SFP1 surface finish probe makes the CMM a “single platform” metrology system. It eliminates the need for hand-held surface measurement devices or transporting parts to […]

Filed Under: Calibration, Coordinate Measuring Machine Tagged With: Renishaw

2D optical measuring device V-CAD rapid by Schneider Messtechnik

June 20, 2013 By Test and Measurement Editor Leave a Comment

Dr. Heinrich Schneider Messtechnik, a company in the field of production measurement technology, is presenting its new 2D optical measuring device V-CAD rapid – a reliable tool that is both mobile and compact. The workpiece can be positioned freely in the coverage field, and the measurement process is started with a just a tap of […]

Filed Under: Coordinate Measuring Machine, Test Equipment Tagged With: schneidermesstechnik

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to Next Page »

Primary Sidebar

Current Digital Issue

A frequency you can count on There are few constants in life, but what few there are might include death, taxes, and a U.S. grid frequency that doesn’t vary by more than ±0.5 Hz. However, the certainty of the grid frequency is coming into question, thanks to the rising percentage of renewable energy sources that…

Digital Edition Back Issues

Oscilloscopes Finder

Search Millions of Parts from Thousands of Suppliers.

Search Now!
design fast globle

Subscribe to our Newsletter

Subscribe to test and measurement industry news, new oscilloscope product innovations and more.

Subscribe Today

EE TRAINING CENTER CLASSROOMS

EE Classrooms

RSS Current EDABoard.com discussions

  • Pic 16f877A Hex file
  • Need help to choose accelerometer
  • 7 segment display connections
  • finding attenuation coefficient in CST
  • Effect of variable gain amplifier and LNA on the input RF signal's phase

RSS Current Electro-Tech-Online.com Discussions

  • NOR gate oscillator in LTspice not working
  • How to designing a battery charging indicator circuit for 18650 battery pack
  • ICM7555 IC duty cycle limit at high frequency?
  • I've DESTROYED 3 piezo buttons :((((
  • led doorbell switch

Footer

EE World Online Network

  • DesignFast
  • EE World Online
  • EDABoard
  • Electro-Tech Online
  • Analog IC Tips
  • Microcontroller Tips
  • Power Electronic Tips
  • Sensor Tips
  • Connector Tips
  • Wire and Cable Tips
  • 5G Technology World

Test & Measurement Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us
Follow us on TwitterAdd us on FacebookFollow us on YouTube Follow us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy