The Windfreak SynthHD Mini is a software tunable RF signal source that generates signals from 10 MHz to 15 GHz with a 0.01-Hz resolution and an output power of up to 20 dBm. The generator also supports FM, AM, pulse, sweep, and list modulations. It can be programmed for standalone operation, running without any PC […]
saeligcompanyinc
Active-probe PC-based scopes feature up to 5 GSa/sec real-time sampling, 4-GSa-deep memory
New 750-MHz and 1-GHz models have been added to the four-channel PicoScope 6000E Series, which provide 8 to 12 bits of vertical resolution, and up to 5GSa/sec sampling rate with a 4-GSa memory, allowing these scopes to display single-shot pulses with up to 200 psec time resolution. The four new four-channel models added to the […]
Wideband 20 GHz amplifier provides +30 dBm output
The Tabor A10200-DST Wideband Signal Amplifier is a new high-frequency module with 100 kHz to 20 GHz bandwidth, a gain of 8-10x, an output power of +30 dBm into 50 Ω, with transition times of less than 10 nsec. The Model A10200-DST HF Amplifier is an ultra-small-footprint, wideband, RF signal amplifier designed for high frequency, […]
Rack-mount scope integrates spectrum analyzer, AWG, DVM, frequency counter/totalizer, serial protocol analyzer
The Rigol DS8000-R Series four-channel digital oscilloscopes are compact 1U half-rack-width instruments available in 350 MHz/1 GHz/2 GHz versions with a maximum sampling rate of 10 GSa/sec. In addition to their use installed in a test rack cabinet, these instruments can be conveniently used on a workbench. The DS8000-R series has been designed around RIgol’s […]
Bench power supply provides up to 80 V or 50 A at 750 W
The Aim-TTi QPX750SP 750-W single-output dc power supply can provide voltages between 80 V at 9.4 A and 12 V at 50 A with a maximum resolution of 0.1 mV. This laboratory power supply is designed to provide a flexible choice of voltage and current to meet multiple application needs. It is housed in a […]
PC-based scopes sport two 12-bit, 2.5 TSa/sec equivalent-time sampling channels
The PicoScope two-channel 9402 Sampler-Extended Real-time Oscilloscope (SXRTO) series comesin two models: the 9402-05 and the 9402-16 with 5-GHz and 16-GHz bandwidth respectively. They complement the already available four-channel models at a lower price point. Designed to analyze repetitive or clock-derived signals, they feature two high-resolution 12-bit channels driven by the equivalent-time sampling (ETS) of […]
Compact 6.4-GHz signal generator is software-tunable
The Windfreak Technologies SynthUSB3 is a pocketable 12.5-MHz to 6.4-GHz software-tunable RF signal generator and frequency sweeper that can be controlled and powered by any device running Windows, Linux or Android via a USB port. The SynthUSB3 also has built-in nonvolatile flash memory so it can be programmed to operate by itself without requiring a […]
Programmable dc electronic loads offer four-mode operation, transient testing
The Teledyne LeCroy T3EL15030xP Programmable DC Electronic Loads are versatile test devices which feature four operating modes to provide wide ranging test capabilities. In Constant Current mode, the electronic loads will sink a constant current, regardless of the voltage at the device terminals. Its Constant Voltage mode causes a constant voltage to appear at its […]
Multifunctional 16-bit AWG features innovative architecture, digital pattern generation
The Teledyne LeCroy T3AWG3252 Multifunctional 16-bit Arbitrary/Function Generators are designed with an innovative architecture that features synchronized analog signal and digital pattern generation. This multifunction 250-MHz arbitrary/sweep/function generator combines multiple functions in a single instrument, including a two-channel function and arbitrary waveform generator with an eight-channel digital pattern generator. These three instrument functions are based […]
PC-based scopes provide up to eight 12-bit channels
The PicoScope PS4000A Series of 20-MHz USB 3.0-connected PC oscilloscopes provide two, four, or eight high-resolution analog channels. These portable scopes have a compact footprint with BNC connectors that accept all common probes and accessories. With a high vertical resolution of 12 bits, 20-MHz bandwidth, 256-MSa buffer memory, and a fast sampling rate of 80 […]
