A new dual-channel digitizer provides synchronous 3.2 GS/sec, 12-bit sampling on each channel. This means no data needs to be lost, even when the card is acquiring data with both channels running at their maximum sampling rate. The ultrafast bus allows all the data to be transferred directly to PC memory for storage, or even […]
Signal generator delivers up to 13.6 GHz with high signal purity. low phase noise
The DSG3000B Series RF Signal Generator offering high purity signal generation and modulation. The DSG3000B is available in 6.5 and 13.6-GHz models with optional built-in IQ baseband generator and OXO timebase with standard AM/FM/ØM analog modulation up to 3.6 GHz, and I/Q modulation and I/Q baseband output up to 6.5 GHz. RIGOL’s new DSG3000B RF […]
USB Type-C test coupon fixtures speed scope debug tasks
New USB Type-C High-speed and Sideband Test Coupon Fixtures provide the industry’s first oscilloscope solution for high-speed probing and analysis of an active data link at the USB Type-C connector. Additional connection to a Teledyne LeCroy protocol analyzer provides complete debug capability of any USB Type-C link negotiation failure. USB Type-C devices undergo negotiation when […]
Radio altimeter flight-line test set adds fiber optic delay
The ALT-9000 universal radio altimeter (RADALT) flight line test set adds fiber optic delay to traditional radio frequency (RF) testing, enabling it to test all types of RADALTS on the market today. The RADALT measures an aircraft’s altitude above the terrain, by transmitting a radio frequency (RF) signal down to the ground and receiving a […]
Handheld two-channel 100/200-MHz scopes combine multimeter, recorder, trend plot functions
The new and improved Siglent SHS-X Handheld Two-channel Digital Oscilloscopes are available in 100 MHz and 200 MHz analog bandwidths and isolated or non-isolated versions, with 1 GSa/sec sample rate and 12 Mpts memory depth. The SHS800X versions have two non-isolated scope channels and one isolated multimeter channel, while the SHS1000X models feature full isolation: […]
Hand-held spectrum analyzers come in 1.3 and 2.7-GHz versions
The Aim-TTi PSA Series 3 RF Spectrum Analyzers are available in 1.3 GHz and 2.7 GHz versions and have long battery lives with improvements over the previous Series 2 instruments, even rivalling more expensive handheld RF products. Improvements include a lower noise floor for increased sensitivity, a new frequency counter, additional RMS, Sample, and Average […]
CAN XL trigger and decode software works on scopes
An oscilloscope-based automotive protocol trigger/decode solution (D9010AUTP) covers CAN XL (Controller Area Network eXtra Long) protocol that enables engineers to verify and debug low-speed automotive serial bus protocols and simplify the development and troubleshooting of systems including CAN/CAN FD (Flexible Data Rate) and CAN XL. CAN XL is the third-generation CAN standard in development by […]
Test setup simulates, characterizes, validates PCIe designs
An end-to-end PCIe test solution enables the simulation, pathfinding, characterization, validation and compliance testing of PCIe designs. To maintain performance goals and prepare for the PCIe 6.0 move to pulse amplitude modulation 4-level (PAM4), customers need a smooth transition from PCIe 5.0 to 6.0, where the integrity of PCIe measurements are backed by leading-edge tools […]
High-voltage probe provides isolation via fiber optics
The Saker-MV ISOVP Probe enables high-voltage isolated measurements via fiber optic cables. Optical fiber isolation provides high-voltage safety and increased signal integrity due to absence of induced interference from external fields. This also allows for much higher common mode rejection as compared to conventional differential probes. The probe head can be remotely put in standby, […]
Test system handles latest Wi-Fi 6E devices
A newly integrated testing system allows testing to the new IEEE 802.11ax WLAN standard. The new band adds to the already available 2.4 GHz and 5 GHz bands. Anritsu’s Wireless Connectivity Test Set MT8862A has been integrated with the EMITE E600 Reverberation Chamber, allowing developers to test the OTA TRP/TIS performance of IEEE 802.11ax devices […]