The W1 (1.0 mm) component line has expanded with the introduction of bias tees, dc block, and semi-rigid cables that operate to 110 GHz and provide broadband frequency scalability in high-frequency device characterization and optical networking applications. The addition of the new W1 components provides Anritsu with the broadest millimeter wave (mmWave) coaxial component portfolio […]
anritsucompany
Signal quality analyzer supports USB4 receiver tests
The USB4 receiver test solution uses the Anritsu Signal Quality Analyzer-R MP1900A in combination with automation software from Granite River Labs or Teledyne LeCroy to control a connected oscilloscope and implement tests meeting the latest USB4 standards. The spread of next-generation 5G mobile communications and Internet of Things (IoT) devices is driving development of various […]
Test setup checks out latest IEEE 802.11 WLAN standard
The new Anritsu Wireless Connectivity Test Set MT8862A has been successfully integrated in combination with the EMITE E600 Reverberation Chamber to test OTA TRP/TIS performance of IEEE 802.11ax devices in a repeatable environment. With built-in communications protocols and optimized performance for WLAN testing, the MT8862A + EMITE reverberation chamber can characterize with high reliability the […]
Instrument runs true PIM analysis over fiber for IQ data
The IQ Fiber Master MT2780A multi-port CPRI-based RF and PIM (passive intermodulation) analyzer that is the first instrument to perform true PIM analysis over fiber and present RF spectrum results derived from IQ data. The MT2780A reduces test costs and time by providing field engineers, field technicians, and third-party contractors with a single instrument to […]
Real-time hand-held spectrum analyzer captures IQ data
IQ capture and IQ streaming options for the Field Master Pro MS2090A make the real-time spectrum analyzer (RTSA) the first handheld analyzer to capture 110 MHz of IQ data. The MS2090A can conduct comprehensive spectrum analysis in a variety of general-purpose applications, including military intelligence and government regulations. With 110 MHz bandwidth and 200 MSps […]
Software runs PCI Express 5.0 receiver tests
The PCIe Gen5 (PCIe 5.0) Link Training and Tx/Rx LEQ Test Automation software runs on the Signal Quality Analyzer-R MP1900A series BERT to create the industry’s first measurement solution supporting the PCIe 3.0, 4.0 and 5.0 standards. With the new options, high-speed server, computer, and communications equipment engineers have a single solution to conduct PCIe […]
Test setup checks out USB4 designs
The QualiPHY USB4 Electrical Transmitter (Tx) and Receiver (Rx) Compliance Test Software (QPHY-USB4-TX-RX) runs on the LabMaster 10 Zi-A and WaveMaster/SDA 8 Zi-B oscilloscopes from Teledyne LeCroy, which are used in conjunction with Anritsu’s Signal Quality Analyzer-R (SQA-R) MP1900A BERT. The USB Type-C connector is quickly becoming the PC industry’s standard for converged high-speed data, […]
Sampling oscilloscopes get built-in 53-Gbaud clock recovery units
A Clock Recovery Unit (CRU) option is now available for the BERTWave MP2110A scope that supports trigger clock generation from a 53-Gbaud PAM4 optical signal. When combined with existing oscilloscope functionality, the new 53-Gbaud CRU allows the MP2110A to serve as an all-in-one solution that can more cost-effectively and efficiently evaluate various PAM4 optical modules […]
New 116-Gbit/sec PAM4 error detector helps evaluate 400 GbE and 800 GbE transmissions
A PAM4 Error Detector (ED) supportes market-leading 116-Gb/sec bit error rate tests for the Signal Quality Analyzer-R MP1900A series. With the new module installed, the MP1900A is the only instrument to achieve error-free measurement of PAM4 signals at 116 Gbit/sec with industry-best operation bit rates and high Rx sensitivity performance. Combined with the previously released […]
RF instrumentation adds 5G protocol test functions
The Radio Communication Test Station MT8000A has been upgraded with 5G Protocol Test functions. The upgrade uses NR (New Radio) Fading software that, when implemented with built-in baseband fading tests, allows the MT8000A to support 3GPP TS 38.521-4 B.1/B.2 V15.0.0-compliant 5G NR channel (TDL) model tests. With the software, the MT8000A can conduct fading tests […]
