Jungik Suh from Keysight recently took us through a simulation of an automotive radar system, a hot topic these days thanks to work being done in autonomous vehicles. The point of simulating a radar signal is to provide a test signal for downstream electronics that will act on what shows up in the radar return. […]
FAQ
Test bed demo: Getting ready for emerging millimeter wave applications
We recently talked with Greg Jue from Keysight who took us through a demo of an R&D test bed for emerging millimeter wave applications. Specifically, as an application example, Jue set up an example 802.11ay system. The 802.11ay spec is designed as an improvement of the 802.11ad WLAN definition that will have a frequency of […]
Making noise figure measurements with handheld analyzers
We recently were able to get with Roland Zhang from Keysight who took us through a noise figure measurement system that really comes in handy if you’re doing 5G measurements in the field. Zhang explains that in the 5G arena there will be a lot of amplifiers or up and down converters to convert signals […]
Instrumentation that measures differential noise in real time
We were recently able to speak with Pat Murray from Anritsu who demonstrated instrumentation that computes differential noise figure. Though noise figure is a well-known parameter, differential noise figure isn’t as commonly used. But it is becoming important for the verification of low-noise amplifiers (LNAs) and other devices used in the front-end of 5G and […]
The instrumentation of nanotechnology
Nano- as a prefix refers to the order of magnitude involved in a specific discussion. A nanometer is one billionth of a meter. Comparing a nanometer to a meter is like comparing the size of a marble to the size of the earth. At 100 nanometers and less, quantum effects become pronounced, and this is […]
How to plan temporary wiring in test facilities
Temporary wiring is usually associated with construction sites and outdoor concerts. But it also comes into play when test regimes demand that several test instruments be set up outdoors, and when research work must commence in temporary quarters. Here are a few things to know about keeping safe when instrumentation gets plugged into wiring that […]
Making measurements with Matlab
Matlab was released in 1984 by Mathworks, an American privately-held corporation whose other major product is the closely-related Simulink. Additionally, Mathworks offers close to 100 other programs, such as Polyspace, SimEvents and Stateflow. Matlab’s main focus is numerical computing, including matrix and algorithm operations, plotting of data and functions and creation of user interfaces. It […]
Test and measurement with LabVIEW
LabVIEW is an awesome product created and maintained by National Instruments. It consists of systems engineering relating to test, measurement and control of instrumentation, devices and machinery, and it is currently used worldwide in numerous applications. Rather than endless lines of textual coding, LabVIEW has a simple graphic interface where devices such as an oscilloscope […]
Measuring signals on transmission lines
Reflections typically arise when a beam of light strikes a polished flat reflective body whose surface is perpendicular to the beam of light. Then the transmitted light minus loss in two-way transit appears at the source. This is similar but not exactly equivalent to an electrical signal traveling through a conductive medium that has an […]
Interoperability testing for the Internet of Things
The Internet of Things might also be thought of as the internet of interoperable things. A systematic testing regime can help uncover problems when devices work in concert. DELMAR HOWARD, INTERTEK GROUP PLC The Internet of Things (IoT) is growing at an exponential rate. In three years, the number of IoT-enabled products is expected to […]